VersaSpeed 100 Repair Mortar – Rapid Hardening Performance
VersaSpeed 100 Repair Mortar is a single-component, rapid hardening, low-shrinkage mortar designed for high-performance horizontal concrete repairs. This micro-fiber reinforced formula delivers exceptional strength and durability, allowing repaired areas to be open to light traffic in just one hour and standard tire traffic after two hours. With the ability to accept an epoxy coating in only four hours, it is ideal for projects that require fast turnaround and minimal downtime.
Key Benefits of VersaSpeed 100 Repair Mortar
- Rapid set time and early strength gain for accelerated project completion
- Suitable for both interior and exterior applications
- Open to light duty traffic in as little as 1 hour
- Coat with epoxy after only 4 hours at 70°F (21°C)
- Micro-fiber reinforcement enhances crack resistance
- Shrinkage-compensated and reduced for long-term stability
- Contains integral corrosion inhibitor for steel protection
- Placement up to 4 in. (10 cm) neat, extendable up to 50% by weight for thicker applications
Common Applications for VersaSpeed 100 Repair Mortar
- Multi-unit residential and commercial floor repairs
- Warehouses, industrial facilities, and institutional buildings
- Bridges, pavements, and highways
- Loading docks, parking decks, and ramps
- Roads, sidewalks, and vertical/overhead form-and-pour applications
Specifications & Compliance
VersaSpeed 100 meets ASTM C928 for packaged, dry, rapid-hardening cementitious materials for concrete repairs and Alberta Transportation Technical Standards Specification B391, ensuring top-tier performance and regulatory compliance.
Packaging
Available in 50 lb (22.7 kg) bags. Standard yield is 0.39 ft³ (0.011 m³) per bag when mixed with 5.25 pints (2.48 L) of water. The product can be extended with up to 25 lb (11.4 kg) of clean, SSD, 3/8″ (9.5 mm) pea gravel for larger repairs, delivering an approximate extended yield of 0.52 ft³ (0.0147 m³) per bag.
Product Properties
| Property | Value |
|---|---|
| Set Time (Light Traffic) | 1 hour |
| Set Time (Standard Tire Traffic) | 2 hours |
| Epoxy Coating Application | 4 hours |
| Maximum Placement Thickness (Neat) | 4 in (10 cm) |
| Extended Placement Thickness | Up to 50% by weight |
| Compliance | ASTM C928, Alberta B391 |
Discover more about our Eucothane Urethane Coating or visit the Euclid Chemical official website for more solutions.
